When Should I Change my Car Tyres?

2- Ten years is a maximum

If the tyres haven't been replaced 10 years after their date of manufacture, as a precaution, Michelin recommends replacing them with new tyres. Even if they appear to be in a usable condition and have not been worn down to the tread wear indicator. This applies to spare tyres as well.

3- Proper care expands a tyre’s lifespan

If you take good care of your tyres' air pressure, tread wear, alignment and so on, you can increase their longevity. Check our Scheduled care tips

For original equipment: follow the vehicle manufacturer’s tyre replacement recommendations.

How to check the manufacturing date

Look for the DOT number on your sidewall.

Learn how to check my tyre's production date with it's DOT code

Climate:

•   Extreme temperatures
•   Rain, snow and ice
•   Oil, grease and other chemicals
•   Strong sunlight and ozone

Driving habits:

•   Speeding
•   Quick starts and emergency braking
•   Driving on damaged roads
•   Failure to notice a change in handling, noise or vibration
•   Failure to consult a professional when something changes

Improper usage:

•   Using summer tyres on snow and ice
•   Mixing tyre types
•   Using wheel and rim sizes that are not compatible
•   Fitting tyres that do not have a speed capability and load index at least equal to or higher than those originally specified by the vehicle manufacturer
•   Re-inflating a tyre that has been run flat or seriously under inflated
•   Using a spare tyre of a different size at speeds in excess of 50 mph

1- Inspect your tyre regularly and look for:

•   Uneven tread wear
•   Shallow tread
•   Troublemakers (rocks, nails, etc.)
•   Damaged areas
•   Damaged valve caps

2- Pay attention to the “feel" of your tyres as you drive.

•   A rough ride may indicate tyre damage or excessive wear.
•   If you notice vibrations or other disturbances while driving, immediately reduce speed, drive with caution until you can safely pull off the road and stop, and inspect your tyres.
•   If a tyre is damaged, deflate it and replace it with your spare. If you do not see any tyre damage and cannot identify the source of the vibration, take the vehicle to a tyre dealer for a thorough inspection.

3- See a professional

• If you see something that you’re not sure about during your inspection, have it examined by your tyre dealer.
• To identify a specific problem

How do I inspect my tyres?

1- Check your air pressure

• It’s quick and can prevent many problems
• Do it once a month

See Air pressure: what should I know?

2- Check the tread wear with one of the two methods:

• With a tread depth gauge
• With the tread-wear indicators

See How to check if you have enough tread left.

3- Inspect your tyres for wear and damage problems

• Check your sidewall for any punctures or bumps and the tread to see if the tyres are wearing evenly
• Be sensitive to any changes in handling or steering

When should I inspect my tyres?

• Once every month
• Before you go on a long road trip.

Next steps :

• Any visible perforation, cut or deformation must be checked thoroughly by a tyre professional.
• Only a tyre professional can tell you if your tyre can be repaired or has to be changed.

You are using an unsupported web browser

You are using a website browser that is not supported by this website. This means that some functionnality may not work as intented. This may result in strange behaviors when browsing round. Use or updgrade/install one of the following browsers to take full advantage of this website

Do I Need New Car Tyres?

How long does a tyre last?

What are the basics?

A few milestones and tips:

1- Keep five years in mind