Your recent

Welcome to your history toolbox

We've saved important information from your previous searches to make your life easier.



Last tyres viewed

Last dealers viewed

Last searches

Do I need new tyres?

Find all the tips to know when replacing your tyres

What are the basics?

There is no way to tell exactly how long a tyre lasts. The lifespan and mileage of a tyre depends on a combination of factors: its design, the driver’s habits, the climate, the road conditions and the care that's put into the tyres.

A few milestones and tips:

1- Keep five years in mind

After five years or more in use, your tyres should be thoroughly inspected at least once per year by a professional.

2- Ten years is a maximum

If the tyres haven't been replaced 10 years after their date of manufacture, as a precaution, Michelin recommends replacing them with new tyres. Even if they appear to be in usable condition and have not worn down to the tread wear indicator.
This applies to spare tyres as well.

3- Proper care expands a tyre’s lifespan

If you take good care of your tyres' air pressure, tread wear, alignment, and so on, you can increase their longevity.

Check our Scheduled care tips

For original equipment: follow the vehicle manufacturer’s tyre replacement recommendations.

How to check the manufacturing date

Look for the DOT number on your sidewall.

What damages tyres?

Physical factors:

  • Age
  • Wear and damage

Road conditions:

  • Potholes, obstacles,curbs ,sharp objects, speed bumps


  • Extreme temperatures
  • Rain, snow and ice
  • Oil, grease and other chemicals
  • Strong sunlight and ozone

Driving habits:

  • Speeding
  • Quick starts and emergency braking
  • Driving on damaged roads
  • Failure to notice a change in handling, noise or vibration
  • Failure to consult a professional when something changes

Neglecting basic tyre maintenance:

  • Air pressure
  • Not routinely checking for wear or damage
  • Alignment and rotation
  • Not going to a professional to remove or fit tyres in case of damage or after an impact
  • Not balancing tyres after they are installed
  • Improper tyre storage
  • Use of sealants that have not been approved

Improper usage:

  • Mixing tyre types
  • Using tyres on damaged, distorted or modified wheels
  • Using wheel and rim sizes that are not compatible
  • Fitting tyres that do not have a speed capability and load index at least equal to or higher than those originally specified by the vehicle manufacturer
  • Reinflating a tyre that has been run flat or seriously under inflated
  • Using a spare tyre of a different size at speeds in excess of 80 kmph

Is my tire worn out?

We recommend to replace your tyre if:

  • The tread is worn beyond the recommended tread depth levels
  • The sidewall is damaged
  • Any hole in the tread is greater than 6 mm in diameter
  • The bead is damaged or deformed (the bead is the edge of the tyre that sits on the wheel)

1- Inspect your tyre regularly and look for:

  • Uneven tread wear
  • Shallow tread
  • Troublemakers (rocks, nails, etc.)
  • Damaged areas
  • Damaged valve caps

2- Pay attention to the “feel” of your tyres as you drive.

  • A rough ride may indicate tyre damage or excessive wear.
  • If you notice vibrations or other disturbances while driving, immediately reduce speed, drive with caution until you can safely pull off the road and stop, and inspect your tyres.
  • If a tyre is damaged, deflate it and replace it with your spare. If you do not see any tyre damage and cannot identify the source of the vibration, take the vehicle to a tyre dealer for a thorough inspection.

3- See a professional

  • If you see something you’re not sure about during your inspection, have it examined by your tyre dealer.

To identify a specific problem.

How do I inspect my tire?

1- Check your air pressure

  • It’s quick and can prevent many problems
  • Do it once a month

See Air pressure: what should I know?

2- Check the tread wear with one of the two methods:

  • With a tread depth gauge
  • With the tread wear indicators

See How to check if you have enough tread left.

3- Inspect your tyres for wear and damage problems

  • Check your sidewall for any punctures or bumps and the tread to see if the tyres are wearing evenly
  • Be sensitive to any changes in handling or steering

See Worn out or damaged?

When should I inspect my tyres?

  • Once every month
  • Before you go on a long road trip.

Next steps :

  • Any visible perforation, cut or deformation must be checked thoroughly by a tyre professional.
  • Only a tyre professional can tell you if your tyre can be repaired or has to be changed.

Spare tyre: can I use it on a day-to-day basis?

Temporary spares have lighter construction to limit their weight on your vehicle so they don’t have the same speed or mileage capabilities. This could affect your vehicle’s stability. The only exception is if your spare tyre is actually a fifth full-size tyre that exactly matches the tyres on your vehicle.

Can I use a high performance tyre if my vehicle doesn’t require one?

  • If you prefer a sportier look or feel to your drive, you may choose to upgrade your tyres to “high-performance” tyres with a higher speed rating.
  • High performance tyres will give you higher speed capability, improved handling control and maximise dry road grip to feel each curve.
  • But to get that extra grip, you may give up some tread life.

Fuel consumption: how does upgrading impact it?

High-performance tyres with higher speed ratings are designed to provide more grip. By definition that means comparatively lower fuel efficiency than for standard tyres since more grip often means more rolling resistance and more effort needed from the engine to move the car forwards. However, thanks to our Michelin Total Performance philosophy, we strive to deliver both great handling and fuel efficiency in our high-performance tyres.

I Want A Bigger Tyre Size: What Do I Need to Know?

What is it?

Some performance-minded drivers upgrade their original equipment wheels with wider, bigger wheels. It’s called tyre upgrading or plus-sizing.

Why do it?

  • It offers better handling when done properly
  • It can make the vehicle look sportier

Two ways of doing it:
1- Plus 1, 2, etc.

  • This is the most popular method
  • Increase your vehicle’s wheel diameter and your tyre’s rim diameter.
  • To make plus-sizing work, the tyre’s aspect ratio decreases while the wheel diameter increases. The overall diameter of the tyre doesn’t change; it’s the wheel’s diameter that increases.

For example:
Changing from a 14” wheel to a 15” wheel. This is called “plus 1” because it increases the size by 1”.

2- Plus Zero

You want to leave your wheel diameter the same but with a wider tyre – note that you may need a wider wheel as well.

Why do it?

It will give you a wider contact with the road and sportier look without having to invest in new wheels (in most cases).

For example:
Going from a 195/75R14 tyre to 215/65R14 tyre. This means that your tyre width will be wider (195 millimetres to 215), your aspect ratio will be smaller (75 to 65) but the wheel diameter stays the same (14).

What Is Staggering?

A staggered fitment is putting larger wheels on the back of your vehicle than the front of your vehicle. This specification comes from the vehicle’s manufacturer, and is designed to improve performance on vehicles with rear-wheel drive.


For upsizing, one needs to keep in mind the below conditions:

  • The Load & speed indexes should be equal or greater than the OE fitment
  • The overall diameter of tyre replacement should be within the range of -2 to +1.5% overall diamter of the OE fitment size
  • Replacement tyre should not touch any vehicle parts stationarily or during use (to be confirmed upon fitment)

What are run flats and who can use them?

What are "run flat" tyres?

Run flat tyres have specific technology to allow you to drive for a limited distance at a reduced speed after a puncture or a drop of tyre pressure.
MICHELIN Zero Pressure (ZP) tyres allows you to drive up to 80 km at 80 kmph with a flat tyre.

My tyre is low: what should I do?

A tyre is low (or underinflated) when it doesn’t have sufficient air pressure to meet the vehicle manufacturer’s recommended psi (pounds per square inch). Underinflated tyres lead to flats and tyre blow outs.


The tyres should be inflated to the pressure as indicated on the sticker on the inside of the driver’s door or on the inside of fuel lid. The vehicle manufacturer has determined this pressure is optimal for load, ride, handling, rolling resistance and tread wear performance.

See where

Some advice:

Never use tyres that have been driven with very low pressure unless they have been thoroughly examined internally and externally by a tyre professional.


Internal damage is not visible while the tyre is mounted; only a professional can tell whether the tyre can be safely used again.

I need to replace my tire. Any advice?

General advice

  • Michelin recommends replacing all four tyres at the same time for maximum safety, to maintain even wear and traction on all four tyres.
  • Take time to research. You can re-buy your original equipment or a different set of tyres. They need to fit your vehicle, your climate, driving environment and your driving style. See How to choose a tyre
  • See a professional to mount and align your new tyres.

Replacing only two tyres

  • Your new tyres need to be the same size and tyre type as your current tyres.
  • Your new tyres need to be installed on the rear axle of your vehicle.
  • If you buy any variation from the original equipment tyre size or speed rating, consult your tyre dealer and the Fitting Guide for recommendations.
  • If you replace less than four tyres, the rotation of the tyres might be affected

Can I mix different speed rated tyre on my car ?

If tyres of different speed ratings are mounted on a vehicle, the lower speed-rated tyres should be placed on the front axle. This is to prevent a potential oversteer condition. Vehicle handling may be affected, and the vehicle's speed capacity is now limited to the lowest speed-rated tyre.

What guidelines should I follow when mixing tyres on 4WD vehicles?

If no instructions for tyre mixing appear in the vehicle owner's manual, adhere to the following guidelines:

Do not mix sizes. All four tyres must be branded with the same tyre size.
Do not mix radial and non-radial tyres. All four tyres must be either radial or non-radial.